Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Dryer Vent Cleaning for Minneapolis Homeowners
A clogged dryer vent is one of the most common fire risks in a Minneapolis home, and it’s also one of the easiest to fix with the right equipment. Lint packs into the duct behind your dryer, airflow drops, and the heat that should leave the house starts building up inside the wall. We clean the full run from the dryer connection to the outside hood, not just the first few feet a shop vac can reach. Our technicians have up to 14 years of experience, and we back every job with a flat price per system agreed in writing before work starts. Same-day bookings are often possible in Minneapolis. Call (844) 320-5410 and we’ll get you scheduled.
Dryer Vent Cleaning Service
Dryer Vent Cleaning Service is the full removal of lint, dust and obstructions from the entire dryer exhaust run, from the transition duct at the back of the appliance all the way to the exterior vent hood. You need it when clothes take longer than usual to dry, the dryer feels hot to the touch, or you can’t remember the last time it was done. At Clover Air Duct Cleaning we use Rotobrush and Nikro systems built for duct interiors, plus Abatement Technologies equipment for HEPA containment so loosened lint doesn’t spill into the room. For a Minneapolis home, dryer vent cleaning comes with before-and-after photos of your own ducts. A typical whole-system cleaning runs $120 to $220, and the written estimate sets the final price.
What Happens During a Cleaning
We disconnect the dryer, work a rotating brush and vacuum through the full run, and clear the exterior hood and flapper. Lint that has matted against the duct walls gets broken loose and pulled out, not pushed further along. When we’re done we check airflow at the hood so you can see the difference.
Why Lint Build-Up Matters
Lint is highly combustible, and a dryer that can’t vent heat runs hotter than it should. Restricted airflow also forces the appliance to run longer cycles, which wears it down faster. A clear vent keeps both the fire risk and the energy waste low.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Dryer Vent Installation
Dryer Vent Installation is the placement of a new exhaust run or the replacement of an existing one with properly sized, smooth-walled duct. You need it when a vent is crushed, uses flexible foil that’s collapsed behind the dryer, runs too far, or terminates inside a garage, attic or crawl space instead of outside. In Minneapolis, older homes often have short runs that were added when a dryer was moved to a new spot, and those are frequently undersized. We install smooth rigid or semi-rigid duct with as few elbows as possible, seal the joints, and confirm the exterior hood opens and closes freely. The cost typically falls between $200 and $450 depending on run length and how much wall or floor work is involved, and the written estimate sets the final price.
Proper Duct Materials
Smooth metal duct resists lint build-up far better than the corrugated foil kind, and it doesn’t sag or trap moisture the same way. Fewer bends mean stronger airflow and less strain on the dryer. We’ll tell you plainly when the existing material is fine and when it needs to go.
Where the Vent Terminates
A dryer vent has to end outdoors, not in an attic, crawl space or attached garage, where moisture and lint accumulate out of sight. We check the termination point as part of every installation. If it’s wrong, we reroute it rather than leaving a hidden problem in place.
Dryer Vent Repair
Dryer Vent Repair covers the physical problems that cleaning alone can’t solve: crushed duct sections, disconnected joints, torn flex, a hood flap that’s stuck open or jammed shut, and duct that’s come loose from the wall. You need it when you can see damage behind the dryer, feel hot air escaping into the laundry room, or notice lint collecting where the duct meets the wall. In Minneapolis, flexible transitions get pinched when a dryer is pushed back against the wall, and that’s a fixable problem rather than a reason to replace the whole run. We repair or replace the failed section, reseal the connections and confirm airflow. Most repairs run $150 to $400 depending on how much duct needs to be replaced, and the written estimate sets the final price.
Common Failures We See
Crushed transition hose, ducts joined with tape that has dried and let go, and screw heads or stray fasteners poking into the duct interior where lint snags. Each one restricts airflow or gives lint a place to collect. We identify the failure before we start work.
Repair or Replace
A single bad section is usually a repair. A run that’s undersized, badly routed or made of the wrong material is worth replacing outright, and we’ll explain why. Our air duct repair work follows the same approach.
Dryer Vent Cleaning Company
A Dryer Vent Cleaning Company should arrive with purpose-built equipment and the ability to show you what it removed. That’s a fair standard, and it’s the one we hold ourselves to at Clover Air Duct Cleaning. We bring Rotobrush and Nikro systems and Abatement Technologies containment on every job, and we photograph the interior before and after so you can see the lint that came out of your own duct. Choosing a company on price alone is how people end up with a five-minute vacuum pass and a bill that doesn’t match the work. Whole-system cleaning in Minneapolis typically runs $120 to $220, and the written estimate sets the final price. If someone quotes you a teaser figure before looking at the run, ask what the final invoice will actually say.
Questions Worth Asking
Ask what equipment they bring, whether they clean the full run or just the visible section, and whether you’ll get photos. A company that can answer those plainly is usually the right one. We’re happy to answer all of them before you book.
What Proof Looks Like
Before-and-after photos of your own vent are hard to fake and easy to check. We also check airflow at the exterior hood when we finish. The Clover Air Duct Cleaning approach is the same across every service we offer.
Dryer Vent Inspection
Dryer Vent Inspection is a check of the whole exhaust path for lint depth, airflow, duct condition and proper termination, done before any cleaning starts. You need one if you’ve recently bought a Minneapolis home, if your dryer is new, or if you’ve never had the vent looked at. We measure airflow, run a camera through longer or hidden runs, and note anything crushed, disconnected or routed incorrectly. The inspection tells you whether you need cleaning, repair or a new run, and we don’t guess at it. An inspection is often included with a cleaning, and on its own it’s a modest line item confirmed in the written estimate. It’s the difference between knowing your vent is clear and hoping it is.
Camera Checks on Long Runs
Runs that travel through walls or across a ceiling can hide crushed or disconnected sections that no brush will fix. A camera shows the interior of the duct instead of leaving it to assumption. We use it whenever the layout makes it worthwhile.
Reading the Airflow
Weak airflow at the exterior hood is the clearest sign of a restriction somewhere in the run. We check it before and after so the improvement is measurable, not just described. If airflow stays low after cleaning, the problem is usually the duct itself.
Commercial Dryer Vent Cleaning
Commercial Dryer Vent Cleaning addresses the larger, harder-working vent systems in laundromats, apartment laundry rooms, hotels, gyms and multi-unit buildings, where lint accumulates far faster than in a single home. You need it on a regular schedule rather than waiting for a problem, because a commercial dryer running restricted cycles is both a fire risk and a costly downtime issue. We clean full manifold and horizontal runs with Rotobrush and Nikro equipment, set up Abatement Technologies containment to keep the space usable, and document what we found and removed for your records. Commercial pricing in Minneapolis depends on the number of dryers and the length of the run, so we quote per building after an inspection. The written estimate sets the final price, with no per-vent figures attached.
Scheduled Service for Multi-Unit Buildings
A building with dozens of dryers needs a schedule, not a one-time visit. We’ll look at usage and run length and recommend an interval that keeps airflow strong. Property managers get documentation they can keep on file.
Keeping Operations Running
Containment matters in a working laundry room because lint in the air settles everywhere. Our equipment holds it at the source, so the room stays usable while we work. That keeps disruption to a minimum.
Brands We Service
We service Guardsman dryer venting components and know where those runs tend to fail, usually at the transition behind the appliance or at a hood that has stopped sealing. We also work with Honeywell and Aprilaire products in homes where dryer venting connects to a broader air quality setup, and we know how those systems interact with exhaust airflow. The equipment on our side of the job is Rotobrush and Nikro, chosen because it’s built for duct interiors rather than adapted from consumer tools.
None of that means the appliance matters less. We look at the vent as a system from the dryer connection to the outside hood, and every part gets checked. Whether your home has Guardsman hardware or any other make, we can help. If you also want the supply side of the system looked at, our air duct cleaning covers that as a separate service.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Clothes take two cycles to dry. A dryer that needs a second run is usually fighting restricted airflow, and the extra heat has nowhere safe to go. It’s the most common early sign of lint build-up.
- The dryer or the laundry room feels unusually hot. Heat that should vent outside is staying inside the appliance or the room. That raises the temperature on parts not designed to hold it.
- You smell something burning or musty. A hot, lint-heavy vent gives off an odor that’s easy to notice and hard to ignore. It’s a reason to stop using the dryer until it’s checked.
- Lint collects behind the dryer or around the vent hood. Visible lint on the outside often means there’s more of it on the inside. The exterior hood should close cleanly and open with airflow.
- The vent run is crushed or disconnected. If you can see a pinched flex duct or a loose connection at the wall, the vent isn’t working the way it should. That’s a repair rather than a cleaning.
Our Process, Step by Step
- 1
We inspect before we clean. We look at the run, check airflow at the exterior hood and confirm the termination point is outdoors. On longer runs we bring a camera to see what’s inside the duct.
- 2
We agree one flat price per system. The estimate is written and agreed before any work starts. There’s no per-vent pricing and no figure that changes once the equipment is out.
- 3
We set up containment. Abatement Technologies equipment pulls HEPA-filtered air and keeps loosened lint from settling through the laundry room. It’s why the space stays usable while we work.
- 4
We clean the full run. Rotobrush and Nikro systems work a rotating brush and vacuum through the entire duct and clear the hood and flapper. Lint comes out, not further in.
- 5
We show you the result. You get before-and-after photos of your own ducts and a final airflow check at the hood. If we found damage, you hear about it with a price to fix it, not a surprise on the invoice.
How Much Does Dryer Vent Cleaning Cost in Minneapolis?
A typical dryer vent cleaning in Minneapolis runs $120 to $220 depending on the length of the run, how accessible it is and how much lint has accumulated. A short, straight run on an exterior wall sits at the low end. A longer run through a wall or ceiling, a second-floor laundry, or a vent that hasn’t been cleaned in years sits higher. A repair to a crushed or disconnected section usually adds $150 to $400 depending on how much duct needs replacing. A new vent run generally falls between $200 and $450.
What affects the price: run length, the number of elbows, whether the duct is hidden, and whether the job turns into a repair. The equipment matters too, since a proper cleaning takes longer than a quick pass with a vacuum hose.
How to avoid overpaying: ask for a flat price per system before work starts, and be wary of a teaser figure that isn’t tied to your actual run. A price should be quoted after someone looks at the vent, not before. Every free estimate we do includes an inspection, a written price and a clear explanation of what the job involves, with no per-vent pricing anywhere. Call (844) 320-5410 for an exact quote. Estimates are free.
Our Service Area Near Minneapolis
We serve homeowners and property managers across Minneapolis and the surrounding cities, including Golden Valley, St. Louis Park, Robbinsdale, Columbia Heights, Richfield, Roseville, Edina, Crystal, Hopkins, Brooklyn Center and New Hope. Dispatch runs from 7am to 7pm, Sunday through Friday, and travel across the metro is straightforward, so a scheduled visit is usually easy to fit into your week. If you’re in Golden Valley or St. Louis Park, we handle dryer vent cleaning and dryer vent cleaning there as well. Call and we’ll confirm the timing that works for you.
Serving Minneapolis, MN – Our Local Coverage Area
We serve Minneapolis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Dryer Vent Cleaning in Minneapolis
It’s the removal of lint and debris from the entire duct that carries heat and moisture from your dryer to the outside. Cleaning covers the full run, from the transition behind the appliance to the exterior hood. It’s different from emptying the lint trap, which only catches a fraction of what ends up in the duct. Call (844) 320-5410 to book yours.
Most residential jobs take about an hour, and a longer or hidden run can take closer to two. The time depends on the length of the duct, how much lint has built up and whether any repair is needed. We don’t rush a full-system cleaning into a ten-minute visit. Call (844) 320-5410 and we’ll give you a realistic window.
Most whole-system cleanings in Minneapolis run $120 to $220, quoted as one flat price per system before work starts. Repairs and new runs are priced separately once we’ve seen the duct, and the written estimate sets the final price. There’s no per-vent pricing and no teaser coupon that turns into a bigger invoice on site. Call (844) 320-5410 for an exact quote. Estimates are free.
Yes, we service Guardsman components and know where those runs tend to wear out, usually at the transition or the exterior hood. We work with Honeywell and Aprilaire equipment in homes with a broader air quality setup as well. Whatever make is in your laundry room, we can take a look. Call (844) 320-5410 to schedule.
Same-day bookings are often possible in Minneapolis, depending on the schedule. Dispatch runs from 7am to 7pm, Sunday through Friday. We answer 24/7; a call outside dispatch hours is booked into the next opening. Call (844) 320-5410 and we’ll find the earliest slot that works.
The written estimate spells out exactly what’s covered on your job, so you know what you’re getting before we begin. We back the work with before-and-after photos of your own ducts and a final airflow check. If something isn’t right afterward, call us and we’ll look at it. Call (844) 320-5410 with any questions about coverage.
Pull the dryer out from the wall if you can reach it safely, and clear the floor space around the appliance and the exterior vent hood. Empty the lint trap before we arrive. Don’t disconnect the duct or take anything apart on your own; we’ll handle the connections. Call (844) 320-5410 if you’re unsure what to move.
Schedule Your Dryer Vent Cleaning Service in Minneapolis Today
A clear dryer vent is a simple thing to keep on top of, and it’s worth doing before a slow dryer turns into a bigger problem. We bring professional-grade equipment, quote one flat price per system, and show you before-and-after photos of your own ducts. Call (844) 320-5410 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Clover Air Duct Cleaning.