Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Duct Cleaning Across Minneapolis
Air duct cleaning in Minneapolis is a scheduled whole-system job, and what your ducts need usually depends on when your house was built. We serve homeowners and property managers across Minneapolis, from the old four-squares near Powderhorn to the ramblers out toward the city’s edges, with professional-grade equipment on every job and one flat price per system agreed before work starts. Our technicians have up to 14 years of experience, and they know this city’s ducts are rarely simple.
Call (844) 320-5410 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Minneapolis Homeowners Call Clover Air Duct Cleaning for Air Duct Cleaning
Minneapolis has no shortage of cheap duct cleaning offers, and homeowners here have learned to be skeptical. Our answer is the hardware: Rotobrush and Nikro systems are purpose-built for duct interiors, not shop vacuums with a long hose, and we run Abatement Technologies equipment for proper HEPA containment while we work. You see before-and-after photos of your own ducts, not stock images.
We clean, repair, and clear – three services under one roof, so a technician who finds a crushed run doesn’t just clean around it. We work with Honeywell and Aprilaire products too, which matters when a Minneapolis homeowner wants a real answer on filtration rather than a sales pitch. If you’re comparing quotes and one is dramatically cheaper, ask what equipment shows up at the door.
We know the neighborhoods and the housing stock across Minneapolis, and that local knowledge shapes every estimate we give.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Air Duct Inspection in Minneapolis
Air Duct Inspection in Minneapolis starts with video: we run a camera through the main trunk and branch runs before anyone touches a brush, because you can’t fix what you haven’t seen. A typical inspection in Minneapolis runs $150-$350, and it’s often the sensible first step in older homes where the duct layout was improvised decades ago. Camera work finds the crushed runs, the disconnected sections, and the rusted joints that a visual sweep from a register misses entirely.
What the Camera Finds
Video inspection is how we confirm what’s really inside wall cavities and attic runs. In Minneapolis’s older homes the ductwork often runs through unheated attic or rim-joist spaces that sweat in winter, and the rust and mold growth that follows is a common find during cleaning. We check for it on every job.
When to Book One
Book an inspection if airflow is weak in some rooms, if you smell mustiness when the heat kicks on, or if the duct layout in your house has never been mapped. It’s also worth doing before you buy a century-old Minneapolis property, so the duct condition isn’t a surprise later.
Residential Air Duct Cleaning in Minneapolis
Residential Air Duct Cleaning in Minneapolis is a whole-system job: supply and return runs, the main trunk, registers, and the air handler, cleaned under negative pressure with HEPA filtration so debris leaves the house rather than settling back into your living room. A typical residential duct cleaning in Minneapolis runs $450-$950 for a full system, and the written estimate sets the final price. We give one flat price per system, no per-vent pricing.
What the Job Involves
Technicians agitate the duct walls with the Rotobrush and Nikro systems while Abatement Technologies equipment keeps the work area contained. We photograph before and after, so you can see the difference. If we find damaged runs, we flag them rather than clean over a problem.
How Often It Makes Sense
Every few years is a reasonable rhythm for most Minneapolis homes, sooner if you’ve had major renovation dust, a furnace replacement, or pets. In a house with original ductwork, the inspection matters as much as the cleaning.
Trusted Brands We Service in Minneapolis
We work with Honeywell and Aprilaire on the indoor air quality side, and we deploy Rotobrush, Nikro, and Abatement Technologies equipment on the cleaning side. These aren’t names we drop for show – they’re what shows up on the job. When your system includes Honeywell or Aprilaire filtration components, our technicians know how they integrate with the ductwork and can advise on upkeep. We don’t stock parts locally, but we can point you to what’s needed and get you moving quickly. If you’re weighing a brand for a future upgrade, we’ll give you a straight take rather than a sales script.
Common Air Duct Cleaning Problems We See in Minneapolis Homes
- Crushed or disconnected runs hidden in wall cavities or attics. A quick visual sweep never catches these, and camera inspection is the only way to confirm them. Left alone, the system keeps pulling dust from unconditioned spaces.
- Unsealed joints and rusted-through sections in rim-joist or attic runs. These spaces sweat in winter, and the rust and mold that follows is what cleaning alone can’t solve. Sealing is often the real fix.
- Undersized retrofit ducts from early forced-air conversions. Short runs that can’t handle modern airflow give poor cleaning results unless the technician works with the improvised layout instead of fighting it.
- Winter dust load from a furnace running nearly constantly. Minneapolis’s long cold season keeps the system pulling dry, dusty air for five months straight, so the dust you see on registers is often recirculating from leaky ductwork.
See the difference
Before
After
Before
After
Before
AfterPricing for Air Duct Cleaning in Minneapolis, MN
Honest ranges for Minneapolis: an inspection typically runs $150-$350, residential whole-system cleaning $450-$950, and duct repair or sealing priced separately by the scope of the work. Commercial systems run higher depending on square footage and the number of rooftop units. What moves the number is the size of the system, how many runs need attention, and whether the job turns into repair and sealing – which is common in century-old Minneapolis homes. The estimate is free, and the written estimate sets the final price before any work starts. Call (844) 320-5410 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Minneapolis’s Century-Old Ductwork Often Needs More Than a Cleaning
Here’s the local challenge you won’t find to the same degree in newer Sun Belt cities: Minneapolis’s pre-war housing stock, especially the 1910s-1930s era, was built with gravity-fed furnaces that were later retrofitted with forced-air systems. Those retrofit ducts were often an afterthought – short, undersized, and riddled with unsealed joints that leak heated air into rim joists and attics, a layout that would never pass a modern Manual D calculation. A technician using camera inspection and agitation tools under negative pressure with HEPA filtration typically finds crushed or disconnected runs that need sealing before cleaning can even be effective. The real fix is often source removal plus sealing those leaks, not just a surface clean. That’s the difference between a Minneapolis job and a surface clean in a newer build, and it’s why we handle repair alongside cleaning.
We Also Serve Cities Near Minneapolis
We work across Minneapolis and into the surrounding communities, including Golden Valley, Robbinsdale, St. Louis Park, and Columbia Heights. The housing stock shifts as you move out from the core, but the equipment and the flat-price approach stay the same. Call for a free estimate wherever you are.
Serving Minneapolis, MN – Our Local Coverage Area
We serve Minneapolis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Minneapolis
It usually means the job involves inspection and often repair, not just cleaning. The retrofit ductwork in pre-war Minneapolis homes is frequently undersized and full of unsealed joints, so a technician has to find and address the leaks before a clean can do much good. Call (844) 320-5410 for an exact quote – estimates are free.
Because the furnace runs nearly constantly for about five months, pulling dry, dusty air through the same leaky ductwork all season. That draws dust from rim-joist and attic runs where rust and mold can develop, so winter dust load is the real driver here. Call (844) 320-5410 for a free estimate.
Expect a camera inspection first, then a clear report on what’s crushed, disconnected, or rusted before any cleaning. Many original systems need sealing and repair alongside the clean, and we price the whole job in the written estimate. Call (844) 320-5410 for an exact quote – estimates are free.
We run a camera through the runs and inspect attic and rim-joist sections where winter condensation is common. If we find rusted-through or mold-affected sections, we flag them and recommend repair rather than clean over them. Call (844) 320-5410 for a free estimate.
A whole-system clean: agitation with Rotobrush and Nikro systems, HEPA containment via Abatement Technologies equipment, supply and return runs, registers, and the air handler, with before-and-after photos. A typical residential job in Minneapolis runs $450-$950, depending on system size and how much repair is needed. Call (844) 320-5410 for an exact quote – estimates are free.
Written by the team at Clover Air Duct Cleaning.