Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Duct Cleaning for Minneapolis Homeowners
If your registers are pushing out dust, your furnace runs longer each winter, and the basement smells musty even after you clean, the problem is usually deeper than the filter: it’s what has built up inside the trunk lines and branch runs. Clover Air Duct Cleaning brings professional-grade Rotobrush and Nikro systems and Abatement Technologies HEPA containment to every Minneapolis job, and our technicians have up to 14 years of experience reading what a duct system is telling them. We’re licensed and insured, we quote one flat price per system before any work starts, and we take before-and-after photos of your own ducts so you can see the difference. Same-day service is often possible. Call (844) 320-5410.
Air Duct Cleaning Services
Air Duct Cleaning Services from Clover Air Duct Cleaning cover the full system the way the equipment manufacturers intend: negative-pressure containment, a rotary brush that actually contacts the duct walls, and a HEPA air scrubber keeping dust out of your living space while we work. Most Minneapolis homes reach the point of needing this when visible dust returns within days of cleaning, when supply registers show dark streaking, or when a home inspection flags buildup in the trunk. Condos in the North Loop and century homes in Lowry Hill both collect material differently, and we adjust the approach to the duct layout in front of us. A typical whole-system cleaning runs $350 to $600 depending on the number of runs and how accessible the trunk lines are.
Rotary Brush and Contact Cleaning
The Rotobrush system drives a rotating brush through each branch run, lifting the layer of settled dust and debris that vacuum-only tools glide over. A shop vac pulls loose material from the surface; it doesn’t agitate what has bonded to the duct walls over years.

Before-and-After Photo Documentation
We photograph the inside of your ducts before we start and after we finish, and those images are yours. It’s the simplest way to know the work happened rather than taking someone’s word for it.

Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
HVAC Duct Cleaning
HVAC Duct Cleaning focuses on the whole connected system your furnace and air conditioner share, and it matters most when supply and return sides are both dirty. In Minneapolis, the heating season runs long and the cooling season pulls humidity through the same ducts, so a system that gets heavy winter use rarely gets the attention the return side needs. We clean supply and return runs, the trunk, the plenum connections, and the register boots, using Nikro equipment for high-volume extraction. If we find a gap in the ductwork or a taped joint that has failed, we note it as part of the inspection. HVAC duct cleaning in Minneapolis typically runs $400 to $650 for a single-family home, with the written estimate setting the final figure.
Supply and Return Coverage
Return ducts carry most of the household dust load and are the runs homeowners forget. We clean both sides of the system because a clean supply feeding air through a dirty return just recirculates the same debris.
Furnace and Air Handler Access
We work around the air handler carefully and reseat access panels before we leave. Cleaning the duct system without checking those connections would leave one of the biggest contamination points untouched.
Vent Cleaning
Vent Cleaning means every floor and ceiling register you can see gets attended to as part of the job, not skipped because it’s behind a couch. Registers and boots hold dust, pet hair, and construction grit that falls back into the duct as soon as airflow picks up again. If your registers have visible dark rings around the grilles or the airflow out of a particular vent feels weaker than the rest, that’s worth a look. We remove the grilles, clean the boots and the run behind each one, and reinstall everything in the same visit. Register and vent attention is included in the whole-system price rather than billed per opening, which is one reason we quote a single flat price. Vent cleaning in Minneapolis is part of a $350 to $600 whole-system visit on a typical home.
Grille and Boot Cleaning
Grilles come down, get washed, and go back up. The boot behind each one collects the same material and we clean it too, because a clean grille over a dirty boot is a half-finished job.
Airflow Balancing Checks
After cleaning, we check that registers are moving air the way they should and flag any run that seems starved. Sometimes the fix is a damper adjustment, sometimes it’s a duct problem worth repairing.
Ductwork Cleaning
Ductwork Cleaning goes past the registers into the trunk lines, branch runs, and transitions where debris actually accumulates. Flexible duct in older Minneapolis housing stock can sag and trap material at low points, while rigid sheet metal trunk lines collect dust along seams and joints. We use Abatement Technologies equipment to hold the work area under negative pressure so disturbed dust leaves the system instead of settling into your rooms. If we find disconnected sections, crushed flex runs, or joints that have separated, we can quote air duct repair alongside the cleaning so the problem is fixed rather than cleaned around. Ductwork cleaning in Minneapolis is generally $400 to $650 for a whole-house system, and the estimate is free.
Negative-Pressure Containment
We seal the work area and run HEPA filtration so the air in your home stays clean while the ducts are opened up. You shouldn’t have to leave the house for a duct cleaning.
Finding Failed Joints and Disconnects
A duct that has pulled apart in a wall cavity quietly wastes the air you paid to heat. We look for those gaps during cleaning and show you what we find rather than leaving it for later.
Air Duct Inspection
Air Duct Inspection is how we decide what your system actually needs before anyone recommends a cleaning. We look inside the ductwork with a camera, check the air handler and coil area, confirm that runs are connected and sized reasonably, and note anything that looks like moisture or pest activity. You’d want an inspection if you’ve moved into a new home, if you’re planning a renovation that will stir up dust, or if a previous cleaning never seemed to change the air quality. Inspection findings drive the recommendation: sometimes the answer is a full cleaning, sometimes it’s a repair, and sometimes it’s that your ducts are in better shape than you feared. An inspection is built into the free estimate visit, and we don’t begin cleaning until you approve the price.
Camera Inspection of Trunk Lines
A camera sees what a flashlight from the register can’t. It shows whether buildup is light surface dust or a heavy layer that’s been there for years, and it shows failed connections we might otherwise miss.
Moisture and Contaminant Screening
Damp ductwork is a different problem from dusty ductwork, and it needs a different answer. We check for signs of moisture, mold-like staining, and pest debris so the recommendation fits what’s actually happening.
Residential Air Duct Cleaning
Residential Air Duct Cleaning covers single-family homes, townhomes, and condos across Minneapolis, sized to the system you have rather than a flat rate that ignores it. Homes near Minnehaha Creek that run humidifiers all winter, and houses in Northeast Minneapolis with original 1920s ductwork, each carry a different load. We clean the full system, document it with photos, and check the furnace filter housing and return grille while we’re at it. If you have Honeywell or Aprilaire indoor air quality equipment, we’ll note how it interacts with the duct layout so the cleaning doesn’t disrupt it. Typical residential work in Minneapolis runs $350 to $600, with larger homes and finished basements at the upper end.
Single-Family and Townhome Systems
Most single-family systems in Minneapolis have between eight and twenty branch runs, and the count drives the time on site. We size the job to the actual system instead of guessing from square footage.
Working With Honeywell and Aprilaire Equipment
If your home has an Aprilaire humidifier tied into the ductwork or a Honeywell filtration setup, we account for it before we start. Those components change how the plenum and trunk get cleaned, and they shouldn’t be disturbed by the process.
Commercial Air Duct Cleaning
Commercial Air Duct Cleaning serves property managers, small offices, retail spaces, and multi-unit buildings in Minneapolis that need documented work rather than a verbal promise. Commercial duct systems in a busy building collect debris faster because the air handler runs longer and higher-volume every day. If tenants are reporting dust, if a rooftop unit hasn’t had attention in years, or if you need before-and-after documentation for a building file, that’s the call. We work around your operating schedule and use containment equipment to keep the space usable while cleaning is underway. Commercial pricing is quoted per building by written estimate, since duct layout and access vary too much for a single range; the estimate itself costs nothing.
Multi-Unit and Office Buildings
Buildings with several separate systems need each one evaluated on its own rather than priced as a lump. We map the systems, quote them clearly, and clean them without disrupting tenants more than necessary.
Documentation for Property Managers
Property files often need proof that maintenance happened. We provide before-and-after photos and a written summary of what was cleaned and what we found, which is useful for records and for the next inspection.
Brands We Service
We work with Rotobrush and Nikro equipment on every job because both are purpose-built for duct interiors rather than adapted from general cleaning tools. The Rotobrush rotary brush system reaches into branch runs and agitates the duct wall; the Nikro high-volume extraction equipment pulls the loosened material out under controlled vacuum. We also deploy Abatement Technologies HEPA units to contain airborne dust, which matters in a home with anyone sensitive to particulates.
On the indoor air quality side, we work with Honeywell and Aprilaire products, which means we understand how filtration and humidification components sit inside a duct system and how cleaning interacts with them. Whether your home has a Honeywell filtration setup, Aprilaire humidification, or any other make, we can help, and we’ll tell you what we find in the system honestly.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Dust returns within days of cleaning. That’s the clearest sign the source is inside the ducts rather than on your furniture. Surface dusting won’t fix what’s being pushed out of the registers.
- Visible dark buildup around register grilles. Streaking around the vent openings means material is accumulating at the boot and the run behind it. It doesn’t clean itself out.
- A musty smell when the system kicks on. Odor carried through the ducts points to moisture or organic buildup somewhere in the system. That deserves an inspection before it becomes a bigger repair.
- Uneven airflow between rooms. One cold room and one warm room can mean a crushed or disconnected run. An inspection will tell you whether it’s a duct problem or a balancing issue.
- After a renovation or a move-in. Drywall dust and construction debris settle into ducts and get recirculated for months. Cleaning after the work is done protects the new space.
Our Process, Step by Step
- 1
Free estimate and system walkthrough. We look at the system, count the runs, check the air handler, and give you one flat price before any equipment comes inside. You’ll know the number up front.
- 2
Containment setup. We seal openings and start the Abatement Technologies HEPA unit so the work area stays under negative pressure. Your rooms stay livable during the job.
- 3
Camera inspection. A camera check of the trunk and main runs tells us what we’re dealing with and whether repair is part of the conversation. If we find a problem, we show you.
- 4
Contact cleaning of every run. Rotobrush and Nikro equipment work through each branch and the trunk, agitating the duct walls and extracting the loosened material. Registers and boots are cleaned as part of the pass.
- 5
Final photo documentation and walkthrough. We photograph the cleaned system and walk you through what we found, including any air duct repair we recommend. You get the photos and the written estimate for any follow-up work.
How Much Does Air Duct Cleaning Cost in Minneapolis?
Air duct cleaning in Minneapolis typically costs $350 to $600 for a whole-house system, and larger homes or systems with more runs land at the upper end. A condo or small townhome with fewer branch runs often falls at the lower end, and a full HVAC duct cleaning that includes supply and return, the plenum, and the air handler area runs $400 to $650. Ductwork cleaning on an older Minneapolis home with long trunk lines or finished basement runs can reach the top of that range because access takes more time.
The factors that move the price are the number of registers and runs, how accessible the trunk line is, whether a finished basement or tight attic limits equipment placement, and whether we find ductwork damage that needs repair. What doesn’t move the price is the number of vents in a way that surprises you later: we don’t quote per vent, we quote one flat price for the whole system and hold to it. If a company advertises a very low opening price, the usual outcome is add-on charges once the technician is in the door. Ask for the total in writing, ask whether the return side is included, and ask whether they photograph the work.
Our free estimate covers all of this. We inspect the system first, explain what we found, and give you a written price before anything is touched. There’s no service-call charge for the estimate and no obligation.
Our Service Area Near Minneapolis
We work throughout Minneapolis and the surrounding metro, including Golden Valley, St. Louis Park, Robbinsdale, Columbia Heights, Richfield, Roseville, Edina, Crystal, Hopkins, Brooklyn Center, and New Hope. Travel time varies with the day, but these are all close enough that scheduling a visit is straightforward. We also handle air duct cleaning in Golden Valley and air duct cleaning in St. Louis Park as part of the same service area.
Serving Minneapolis, MN – Our Local Coverage Area
We serve Minneapolis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Air Duct Cleaning in Minneapolis
Air duct cleaning is the process of removing accumulated dust, debris, and contaminants from the supply and return ductwork in a heating and cooling system. It involves agitating the duct walls with a rotary brush, extracting the loosened material under vacuum, and containing airborne dust with HEPA filtration. It’s not the same as changing a filter: the goal is cleaning the duct surfaces themselves. Call (844) 320-5410 to schedule an estimate.
A typical Minneapolis home takes two to four hours from setup to final walkthrough. The range depends mostly on the number of branch runs and how accessible the trunk line is. Homes with finished basements or tight attic access at the far end of that range. We’ll give you a realistic time estimate when we quote the job.
Expect $350 to $600 for a whole-house cleaning and $400 to $650 when the full HVAC system including supply and return is covered. The written estimate sets the final price, so there’s no surprise on the invoice. We quote per system, never per vent. Call (844) 320-5410 for an exact quote, which is free.
We use Rotobrush and Nikro equipment on the job rather than servicing it as a repair item. If you’re asking whether we have the right tools for a system your last company showed up without, the answer is yes. Our technicians have up to 14 years of experience with this equipment. Call (844) 320-5410 to talk through what your system needs.
Same-day service is often available, and the fastest way to find out is to call. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. We’re closed Saturday. If a call comes outside dispatch hours, we book it into the next opening. Call (844) 320-5410.
We stand behind the work and will return to address anything we missed. Rather than quote a warranty figure, we put the scope in writing before the job starts: what gets cleaned, what the flat price covers, and what the before-and-after photos will show. That written scope is the clearest guarantee we can give you. Call (844) 320-5410 with questions.
Clear access to the registers, the furnace, and the air handler, and move anything that blocks a return grille. Close windows and turn off the system before we arrive. If you have pets, keep them in a room away from the work area for the duration. That’s usually all it takes, and we’ll walk you through anything specific to your home when we schedule.
Schedule Your Air Duct Cleaning Service in Minneapolis Today
Clean ducts start with the right system. If your registers are dusty, your air smells stale, or you want documentation that the job was done properly, call Clover Air Duct Cleaning at (844) 320-5410 for a free estimate. We’re licensed and insured, we quote one flat price per system before work starts, and we photograph your ducts before and after. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Learn more about Clover Air Duct Cleaning and what we do, or read more on air duct cleaning in Minneapolis. We also handle dryer vent cleaning for fire safety and air duct repair when ductwork has failed.
Written by the team at Clover Air Duct Cleaning.